A Volkswagen Scirocco came into TEC AUTO with a persistent P0098 fault — Intake Air Temperature Sensor 2 Circuit High. The owner had already replaced the sensor once. The light came back within days.

That’s a pattern we see regularly. Car goes to a shop, gets a part replaced, drives away, and the same fault is back a week later. Sometimes it’s not the part. Sometimes it’s what’s feeding the part.

What P0098 Actually Means

P0098 flags when the intake air temperature sensor is reading too high — above what the ECU expects given the current conditions. Most workshops see that code, replace the IAT sensor 2, and call it done. On many cars, that works. On this Scirocco, it didn’t.

When we connected it to VCDS — Volkswagen’s own diagnostic system — and did a full inspection, we found a broken wire in the harness leading to the sensor. The wire was damaged enough to send a bad signal to the ECU, which logged the fault. The sensor itself was reading correctly. The problem was upstream.

Why the Parts Replacement Didn’t Work

Replace a working sensor and you’re changing something that isn’t broken. Fault codes tell you where the signal went wrong — not always which component caused it. Real diagnosis means tracing the fault to its source, not just swapping whatever the code points to.

In this case, the broken wire was generating the fault signal. A third sensor replacement wouldn’t have fixed it either.

The Repair: $30

Once we located the damaged wire and repaired the harness, the fault cleared. It hasn’t returned. Total cost to the customer: $30.

This is the difference between parts-swapping and actual diagnosis. A proper check before touching any components saves time, money, and repeat trips to the workshop.

Volkswagen Diagnostics at TEC AUTO

We use VCDS — the same diagnostic platform Volkswagen’s authorised workshops use — to read live data, fault histories, and sensor values across the full vehicle network. It gives us the same visibility as a VW dealership technician, without the dealership bill.

If your VW has a fault code that keeps coming back after a repair, bring it in. We’ll trace it properly before touching anything.

📍 60 Jln Lam Huat #04-61, Carros Centre, Woodlands
📞 +65 9339 2769  |  WhatsApp us

Audi shares most of its engines and electronics with VW. If you drive one, see Audi servicing costs in Singapore.

Frequently asked questions

What does fault code P0098 mean on a VW?

P0098 means the engine computer sees the intake air temperature sensor 2 circuit reading too high for the conditions. It points to the sensor circuit, which includes the wiring, not only the sensor itself.

Why does my VW fault code come back after the part was replaced?

Usually because the part was not the cause. A fault code shows where the signal went wrong, not which component failed. On the Scirocco in this post, a broken wire in the harness to the sensor caused the fault, so a new sensor could not fix it.

How much did the P0098 repair cost?

$30. We found the damaged wire, repaired the harness and the fault cleared. It has not come back.

How do you find the real cause of a fault code that keeps coming back?

We read the fault history, live data and sensor values with VW-level diagnostics, then check the wiring and connectors feeding the part before replacing anything.

Where can I get a VW fault code diagnosed in Singapore?

TEC AUTO SERVICES, 60 Jln Lam Huat, #04-61, Carros Centre, Woodlands, Singapore 737869. Open Monday to Friday 9am to 6pm and Saturday 9am to 4pm. WhatsApp +65 9339 2769.